DS2000 03.20.07 Release Notes
New Features in 03.20.07
DS2000 Release Notes 7 ◆ 03.20.07
8005-Extension Name Match
(NAME MATCH)
Use this option to determine which portion of the extension’s programmed name Directory Dialing
will use to route the call. The options are
1 (first) or 2 (last). By default, this option is 1 (first). The
setting you choose in this option depends on how you set up 0201-Name Format. For example:
8005-Unscreened or Screened Transfer
(UTRF OR STRF)
Use this option to define the action Directory Dialing uses when routing a call. The entries for this
option are
1
(Screened Transfer) or
2
(Unscreened Transfer). By default, this is
1
(Screened Transfer).
8005-Screened Transfer Timeout
(SCRN TRF TIMEOUT)
Use this option to set how long a Screened Transfer (STRF) from the Directory Dialing Mailbox
will ring an unanswered extension before recalling. The entry range for this option is
0-255 sec-
onds. A setting of
0 = no recall. By default, this option is 15 (15 seconds).
● The 0401-Transfer Recall interval has no interaction with this timer.
8005-Time Limit for Dialing Commands
(DIALING TIMEOUT)
This option determines how long IntraMail will wait for the caller connected to the Directory Dial-
ing Mailbox to dial before repeating the Directory Dialing Message. If the caller doesn’t dial within
three repeats of the message, IntraMail routes the call to the Next Call Routing Mailbox for the
Directory Dialing Mailbox. The entry range for this option is
0-99 seconds. A setting of 0 = no tim-
eout. By default, this option is
5 (5 seconds).
8005-Fax Detection
(INCOMING FAX DET)
Use this option to enable or disable Fax Detection for the Directory Dialing Mailbox. If enabled (
Y
),
the Directory Dialing Mailbox will detect incoming fax CNG tone. The fax will then route to the
company fax machine according to the settings of 8004-Fax Extension. If disabled (
N
), the Directory
Dialing Mailbox will not detect incoming fax calls. By default, Fax Detection is disabled (
N
).
8005-Next Call Routing Mailbox
(NEXT CALLRT MBOX)
Use this option to specify the Next Call Routing Mailbox (000-015) for the Directory Dialing
Mailbox. If a Next Call Routing Mailbox is specified, the following will occur:
● If the caller dials 0 while listening to the Directory Dialing Message, they route to the 0 action
programmed into the Dial Action Table associated with the Next Call Routing Mailbox.
● If the caller dials # while listening to the Directory Dialing Message, they route immediately
to the Next Call Routing Mailbox and listen to the recorded Instruction Menu Message for
that mailbox.
By default, there is no entry for this option (
UND - entered by pressing CLEAR).
0201-Name Format Setting 8005-Extension Name Match Entered Name Directory Dialing Routes by:
1 (first-last) 1 (first) Mary Jones Mary
2 (last) Jones
2 (last-first) 1 (first) Jones
2 (last) Mary
To Next Page
Loading...
Need help?
General
