DS2000 03.20.07 Release Notes
New Features in 03.20.07
DS2000 Release Notes 17 ◆ 03.20.07
1705 Program Entry
User Programmable Feature (Super Display Telephone Only)
#SM (#76) + Press the soft key your want to program (or press Vol Up or Vol Down to scroll
through the keys) +
HOLD + ICM + Vol Up or Vol Down to select key option + HOLD + CONF +
SPK to exit.
10
SP DIAL 2
Press to access Personal Speed Dial bins 711-720. The display shows
the Speed Dial number (or name - if programmed).
11-30
PERS SPDL BIN 1-20
Press to access the associated Personal Speed Dial bin (701-720).
The display shows the Speed Dial number (or name - if pro-
grammed).
1705 - Soft Key Configuration
ICM
+ #*#* + Password (372000) + HOLD + 1705 + HOLD.
EXTENSION
(Key selection)
KEY NUMBER? (1-12) [1]
(Key data entry)
Key data (00=UNDEFINED, 01=DIRECTORY, 02=INTERCOM, 03=PERSONAL,
04=COMPANY, 05=PROGRAM, 06=V-MAIL, 07=CALLS, 08=PAGE, 09=SP DIAL 1,
10=SP DIAL 2, 11-30=Personal bins 1-20
Press this: To do this:
When entering key data, your entry is automatically accepted after you enter the key code.
VOL ▲ or Vol ▼
(Key selection) Scroll to the soft key you want to program.
(Key data entry) Saves the key data and goes to the next (or previous) entry.
HOLD
(Key selection) After scrolling to the soft number key you want to program, press HOLD to
enter key data.
(Key data entry) When scrolling through available entries, press
HOLD to accept the dis-
played entry.
CONF
Back up to the previous prompt level. Pressing CONF does not cancel your entry.
ICM + HOLD + VOL ▲
or Vol ▼
Scroll through the available entries (instead of entering a code). ICM flashes fast while
scrolling.
CLEAR
Make the entry undefined (the same as entering 00).
Super Display Telephone Idle Menu
Soft Key Options
Entry Display Description
To Next Page
Loading...
Need help?
General
