Hardware Manual
(03.**.**)
For additional resources, visit our Technical Support site on the web at
http://ws1.necii.com/ds2000
.
5. Maintenance
Options and SMDR
1. Installing the Cabinet
3. Installing Extensions
and Trunks
4. Optional
Equipment
This manual is for system software versions 03.**.** or higher.
Software version 03.**.** requires expanded memory
CPU P/N 80025B. Do not
install in prior versions.
Expanded Database
System numbering is expanded in version 03.**.**. See
Expanded Database
on page 1-
2 for more.
• Extension numbers are 300-427 and trunk numbers are 1-64 (using extension numbers
101-164).
• UCD Hunting Groups are preset at 700-707, and the Voice Mail Hunt Group is preset
at 700.
• Ring Groups are preset at 600-607.
Automatic Slot Configuration
Automatic Slot Configuration automatically sets up station and trunk PCBs when you
initially power up the system. This simplifies installation because you no longer have to
use system programming to activate station and trunk PCBs after you plug them in.
• See
Automatic Slot Configuration
on page 1-4 for more.
Simplified Voice Mail Programming
The system provides a predefined set of Voice Mail station numbers (201-208), which
have a predefined set of corresponding Voice Mail extension numbers (500-507). In addi-
tion, the Voice Mail extension numbers are already designated as Voice Mail ports and
assigned to a predefined UCD Hunting Group (with 700 as the master number). Because
of these assignments, programming external Voice Mail is a simple, 2-step process:
• In
Program 8001 - Voice Mail Setup
, enter E to enable external Voice Mail. (IntraMail
and UltraMail set up this option automatically.)
• In
Program 9902 - Set Up Stations (DS2000)
, assign the Voice Mail ports to the pre-
defined Voice Mail station numbers (201-208).
• See
Voice Mail Setup
in the
Quick Setup Guide
that came with your system for more.
2. PCB Installation
6. Specifications
and Parts
To Next Page
Need help?
General
