Backing Up Site Data
5-2 ◆ Section 5: Maintenance Options and SMDR DS2000 Hardware Manual
9. Press HOLD.
Normally, you see
9906: SAVING . . . . . . . . .
The PC Card Active LED is on during backup.
If the address you choose already has data stored in it, you see: REPLACE DB nn Y/N.
- Press N + HOLD to back up to step 5.
- Press Y + HOLD to proceed.
You automatically exit programming when the upload completes.
PC Card Backup Error Messages
PC Card Backup Error Messages
This error message: Means this:
NO PCCARD The PC card is not installed. Install the PC
card and try again.
ERASE FAILED The system could not overwrite an existing
data base on the PC card. Repeat the proce-
dure. If you get the message again, try another
PC card.
SAVE FAILED The system could not save data to the PC card.
Repeat the procedure. If you get the message
again, try another PC card.
Figure 5-1: Using the PC Card
80000 - 27A
NEC America, Inc.
INSERT
M
EGABYTE
L
INEAR
F
LASH
www.cng.nec.com
Mode Switch
PC Card Active
LED
P/N 85880
To Next Page
Loading...
Need help?
General
