17
Basic Operation –Power ON and OFF Modes
1. Pressing the power button.
NOTE: Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.
2. Using the remote control
NOTE: Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.
3. Pressing the Main Power Switch.
NOTE: When the Main Power Switch is used to power off
the LCD, the remote control and the power switch will
not activate the on mode. Be sure to turn the
Main Power Switch to the on mode before using these two
options.
Main Power Switch
The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the
following three options:
Power Button
REMOTE
CONTROLLER RU-M104
To Next Page
Loading...
Need help?
General