Extender Network Settings
33
AC1200 WiF Range Extender
3. Enter www.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Settings > W
ireless.
The Wireless page displays.
6. Click the IP Address heading to expand the IP
Address section.
By default, the Get Dynamically IP
Address From Router radio button is selected.
7. Select the Use Static IP
Address radio button.
8. Complete the fields to specify the IP network IP addresses.
9. Click the SA
VE button.
Your settings are saved.
Use the Extender With MAC Filtering or Access Control
When the WiFi device connects through the extender to your router, the MAC address of the
WiFi device shown on the router is translated to another MAC address. If your router’s MAC
filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender but
cannot get an IP address from the extender and cannot access the Internet. To allow the WiFi
device to receive an IP address from the extender and access the Internet, you must provide
the translated MAC address to the router.
To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter
, WiFi access control, or ACL.
For more information about how to disable your router’s MAC filter, WiFi access control,
or
ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
To Next Page
Loading...
Need help?
General
