Optimize Performance With Quality of Service
34
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 14.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
The Quality of Service page displays.
5. In the QoS Mode menu, select Port Based.
A message displays warning you that previous QoS settings for the switch will be lost.
6. Click the OK button.
7. Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Enable Port-Based QoS
To enable port-based QoS:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select QoS.
The QoS Global Configuration page displays.
7. Select the QoS Mode Port Based radio button.
The page adjusts.
8. Complete the fields to select ports and assign their priority.
To Next Page
Loading...
Need help?
General
