Manage the Switch
69
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
The Device Reboot page displays.
6. Select the check box.
7. Click the Apply button.
The switch reboots.
Use the ProSAFE Plus Utility to Reboot the Switch
To reboot the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select Maintenance > Device Reboot.
The Device Reboot page displays.
7. Select the check box.
8. Click the APPLY button.
The switch reboots.
Save the Switch Configuration
You can save the switch configuration as a file. We recommend that you save the
configuration. Then you can quickly restore the switch configuration if you change the
settings and then decide to return the switch to its previous settings.
To Next Page
Loading...
Need help?
General
