Manage the Switch
75
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > Monitoring > Mirroring.
7. In the Mirroring menu, select Enable.
8. In the Source Port table, select the check box for the source port.
9. In the Destination Port menu, select the destination port.
10. Click the APPL
Y button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
