To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the NETGEAR Orbi Pro SXK50 and is the answer not in the manual?
General| Product Name | NETGEAR Orbi Pro SXK50 |
|---|---|
| Product Type | WiFi System |
| Category | Network Router |
| Wi-Fi Bands | Tri-band |
| Number of Ethernet Ports | 4 |
| Memory | 512 MB |
| Security | WPA3 |
| Guest Network | Yes |
| VPN Support | Yes |
| MU-MIMO | Yes |
| Beamforming | Yes |
| OFDMA | Yes |
| WiFi Technology | WiFi 6 |
| Number of Devices Supported | 40 |
| Ethernet Ports | 4 x Gigabit Ethernet ports |
| WAN Ports | 1 x 10/100/1000 Mbps Gigabit Ethernet port |
| Processor | Quad-core |
| Antenna | Internal antennas |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 90% maximum (non-condensing) |
Lists the Orbi Pro WiFi 6 AX5400 router (SXR50) and satellite (SXS50) models covered in this manual.
Describes the hardware features of the Orbi Pro WiFi 6 AX5400 router (SXR50) and satellite (SXS50).
Explains the LED indicators for the Orbi Pro WiFi 6 AX5400 system router and satellite.
Details the information found on the Orbi Pro WiFi 6 AX5400 router and satellite labels.
Provides instructions on how to connect the Orbi Pro WiFi 6 AX5400 router via Ethernet.
Offers guidance on optimal placement of the Orbi Pro WiFi 6 AX5400 satellite for syncing.
Outlines the process for syncing an Orbi Pro WiFi 6 AX5400 satellite with the router.
Explains how to set up and sync an Orbi Pro satellite using a wired Ethernet connection.
Details how to manage and monitor your Orbi network remotely using NETGEAR Insight.
Describes the NETGEAR Insight Business VPN feature for secure remote site connectivity.
Guides on connecting to the Orbi network via wired or WiFi for initial setup.
Explains the different types of logins required for router setup and access.
Instructions on accessing the router's web interface for viewing or changing settings.
Details how to change the router's web interface language from the default.
Provides steps to handle browser security warnings when accessing the router interface.
Guides users through automatically setting up the router's Internet connection.
Explains how to manually configure the router's Internet connection settings.
Steps to configure the router for an Internet connection that does not require a login.
Instructions for setting up the router with an Internet connection that requires login credentials.
Details various methods for setting up IPv6 Internet connections on the router.
Explains the Maximum Transmission Unit (MTU) setting and when to adjust it.
Allows or denies network access based on device MAC addresses.
Enables blocking or allowing access to the entire Orbi network based on MAC addresses.
Configures keywords to block specific Internet sites on the network.
Allows exempting a specific trusted computer from blocking rules.
Enables blocking specific Internet services based on type or schedule.
Sets schedules for blocking Internet sites and services.
Configures the router to send email notifications for security events.
Provides a general explanation of Virtual Local Area Networks (VLANs).
Details the router's support for Virtual Local Area Network (VLAN) management.
Explains how the router segments traffic using LANs, VLANs, and WLANs.
Describes VLAN profiles and how to create, modify, or delete them.
Guides on assigning LANs, WiFi networks, or ports to specific VLANs.
Explains the Trunk and Access modes for Ethernet ports.
Introduces the four supported WiFi networks (WLANs) and their default settings.
Details the default admin WiFi network (Wireless 1) and its settings.
Describes the Employee WiFi network (Wireless 2) for separating employee traffic.
Covers the IoT WiFi network (Wireless 3) for smart devices.
Explains setting up a guest WiFi network with open access or a captive portal.
Defines Local Area Networks (LANs) and explains the router's five LAN configurations.
Provides options to change settings for each of the five LANs on the router.
Explains how to configure a Dynamic Host Configuration Protocol (DHCP) server for each LAN.
Allows assigning a permanent IP address to a computer on a LAN.
Allows viewing or configuring wide area network (WAN) settings for the Internet port.
Explains Dynamic DNS and how to set up a NETGEAR account for remote access.
Details the DMZ server feature for applications incompatible with NAT.
Explains how to set up fixed, static routes for specific network configurations.
Guides on enabling Universal Plug and Play (UPnP) for device network access.
Describes setting up link aggregation groups (LAG) for increased throughput or redundancy.
Covers automatic and manual firmware updates for the router and satellites.
Details changing the admin password and enabling password reset features.
Provides methods to view router and satellite status and connected devices.
Explains configuring the router to send system logs to a syslog server.
Enables traffic metering to monitor and control Internet traffic volume and time.
Allows changing the Network Time Protocol (NTP) server for network time synchronization.
Guides on manually setting the router's time zone and daylight saving options.
Explains backing up, restoring, or erasing router configuration settings.
Details how to set up remote management access to the router over the Internet.
Guides on configuring the Orbi Pro router to function as a WiFi access point (AP).
Explains how to switch the Orbi Pro router back to its default router mode.
Covers managing the physical Sync button on the router and satellites.
Allows managing download bandwidth allocation for each WiFi network (SSID).
Guides on changing the router's region of operation and related compliance.
Explains enabling or disabling SSID broadcast for 2.4 GHz and 5 GHz radios.
Details managing 20/40 MHz coexistence for the 2.4 GHz radio to optimize WiFi speed.
Explains enabling or disabling Wi-Fi Multimedia (WMM) to prioritize traffic.
Discusses CTS/RTS threshold and preamble mode settings for WiFi radios.
Guides on adjusting transmission output power for WiFi radios to manage interference.
Allows generating a new backhaul password for WiFi communication between router and satellite.
Explains enabling or disabling MU-MIMO for improved performance with multiple WiFi clients.
Covers enabling or disabling Protected Management Frames (PMF) for enhanced security.
Allows specific incoming traffic to reach a server on the local network.
Guides on adding custom services for port forwarding.
Details how to edit existing port forwarding entries.
Explains how to remove a port forwarding entry.
Describes port triggering for applications requiring dynamic port opening.
Guides on enabling port triggering settings for specific services.
Explains Virtual Private Network (VPN) concepts and client-to-gateway tunnels.
Addresses potential LAN IP scheme conflicts for VPN connections.
Details enabling and configuring OpenVPN service settings on the router.
Guides on installing OpenVPN software and configuration files on client devices.
Explains using VPN to access your own Internet service remotely.
Guides on allowing VPN clients to access the Internet through the router.
Details blocking VPN client access to the Internet, defaulting to business network access only.
Provides troubleshooting tips for common network problems.
Outlines the correct sequence for restarting network devices.
Ensures WiFi settings match between client devices and the router.
Verifies correct network settings for computers, especially IP addressing.
Offers solutions for issues where the router and satellite fail to sync.
Provides steps to resolve issues with logging into the router interface.
Guides on troubleshooting problems with accessing the Internet connection.
Addresses issues preventing web pages from loading correctly.
Offers steps to troubleshoot PPPoE Internet connection issues.
Provides steps to isolate and resolve WiFi connectivity problems.
Explains using the ping utility to diagnose network issues.
Demonstrates VLAN configuration for a home network setup with Orbi Pro.
Illustrates VLAN configuration for a business network setup with Orbi Pro.
Lists the default factory settings for the Orbi Pro WiFi 6 router and satellite.
Provides detailed technical specifications for the router and satellite.
