5.
Click the View list of blocked devices not currently connected to the network
link.
The Access Control page displays.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected and are blocked from accessing the Orbi network.
6.
To add a device to the blocked list, do the following:
a. Click the ADD button.
The Add Blocked Device page displays.
b.
Enter the MAC address and device name for the device that you want to block.
c. On the Add Blocked Device page, click the Apply button.
The device is added to the blocked list on the Access Control page.
7.
To remove a device from the blocked list, do the following:
a.
Select the check box for the device.
b. Click the REMOVE FROM THE LIST button.
The device is removed from the blocked list.
8.
To change the information for a device on the blocked list, do the following:
a.
Select the check box for the device.
b. Click the EDIT button.
The Edit Blocked Device page displays.
c. Change the access rule, MAC address, or device name.
d. On the Edit Blocked Device page, click the Apply button.
The device is changed on the blocked list on the Access Control page.
9. Click the Apply button.
Your settings are saved.
Block Internet sites by using keywords
You can use keywords to block certain Internet sites from your network. You can use
blocking all the time or based on a schedule.
User Manual63Control Access to the Internet
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
To Next Page
Loading...
Need help?
General
