EasyManuals Logo
Home>NETGEAR>Network Router>Orbi

NETGEAR Orbi User Manual

NETGEAR Orbi
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
Troubleshooting
116
Orbi High-Performance AC3000 Tri-band WiFi System
5. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
6. Click the ADVANCED tab.
The ADVANCED Home page displays.
7. Check that an IP address is shown for the Internet port.
If 0.0.0.0 is shown, your router did not obtain an IP address from your Internet service
provider (ISP).
If your router cannot obtain an IP address from the ISP, you can force your cable or DSL
modem to recognize your new router by restarting your network. For more information,
see
Sequence to Restart Your Network on page 114.
If your router is still unable to obtain an IP address from the ISP, the problem might be one of
the following:
Your Internet service provider (ISP) might require a login program. Ask your ISP whether
they require PPP over Ethernet (PPPoE) or some other type of login.
If your ISP requires a login, the login name and password might be set incorrectly.
Your ISP might check for your computers host name. Assign the computer host name of
your ISP account as the account name on the Internet Setup page.
If your ISP allows only one Ethernet MAC address to connect to Internet and checks for
your computer’s MAC address, do one of the following:
- Inform your ISP that you bought a new network device and ask them to use the
router’s MAC address.
- Configure your router to clone your computers MAC address.
Troubleshoot Internet Browsing
If your router can obtain an IP address but your computer is unable to load any web pages
from the Internet, it might be for one of the following reasons:
The traffic meter is enabled, and the limit was reached.
By configuring the traffic meter not to block Internet access when the traffic limit is
reached, you can resume Internet access. If your ISP sets a usage limit, they might
charge you for the overage.
Your computer might not recognize any DNS server addresses. A DNS server is a host
on the Internet that translates Internet names (such as www addresses) to numeric IP
addresses.
Typically, your ISP provides the addresses of one or two DNS servers for your use. If you
entered a DNS address during the router’s configuration, restart your computer.

Table of Contents

Other manuals for NETGEAR Orbi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Orbi and is the answer not in the manual?

NETGEAR Orbi Specifications

General IconGeneral
BrandNETGEAR
ModelOrbi
CategoryNetwork Router
LanguageEnglish

Related product manuals