Customize Internet Traffic Rules for Ports
96
Orbi High-Performance AC3000 Tri-band WiFi System
11. Specify the internal ports by one of these methods:
• Leave the Use the same port range for Internal port check box selected.
• Type the port numbers in the Internal port range field.
12. Type the IP address in the Internal IP address fields or select the radio button for an
attached device listed in the table.
13. Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering page.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
5. Leave the Port Forwarding radio button selected as the service type.
6. In the table, select the radio button next to the service name.
7. Click the Edit Service button.
The Ports - Custom Services page displays.
8. Specify changes to any of the following settings:
• Service Name. Type the service name.
• Service Type. If you are unsure, select TCP/UDP.
• External port range.
• For the internal ports, leave the Use the same port range for Internal port check
box selected or enter the ports in the Internal port range field.
• Internal IP address. Type the IP address in the Internal IP address fields, or select
the radio button for an attached device listed in the table.
9. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
Need help?
General
