2
Robus350
7 Additional information 12
7.1 Programming keys 12
7.2 Programming 12
7.2.1 Level one functions (ON-OFF functions) 12
7.2.2 Level one programming
(ON-OFF functions). 13
7.2.3 Level two functions
(adjustable parameters) 13
7.2.4 Level two programming
(adjustable parameters) 14
7.2.5 Level one programming example
(ON-OFF functions). 14
7.2.6 Level two programming example
(adjustable parameters) 15
7.3 Adding or Removing Devices 15
7.3.1 BlueBUS 15
7.3.2 STOP Input 15
7.3.3 Photocells 16
7.3.4 Recognition of other devices 16
7.4 Special Functions 16
7.4.1 “Always open” Function 16
7.4.2 “Move anyway” function 16
7.5 Connection to other devices 17
7.6 Troubleshooting 17
7.7 Diagnostics and Signals 17
7.7.1 Flashing light signalling 18
7.7.2 Signals on the control unit 18
7.8 Accessories 19
8 Technical characteristics 20
Instructions and Warnings for users of ROBUS gearmotor 21
Table of contents: page
1 Warnings 3
2 Product description and applications 3
2.1 Operating limits 3
2.2 Typical system 4
2.3 List of cables 4
3 Installation 4
3.1 Preliminary checks 5
3.2 Installation of the gearmotor 5
3.3 Installation of the Various Devices 6
3.4 Electrical connections 6
3.5 Description of the electrical connections 7
4 Final checks and start up 7
4.1 Choosing the direction 7
4.2 Power Supply Connection 8
4.3 Recognition of the devices 8
4.4 Recognizing the length of the leaf 8
4.5 Checking gate movements 8
4.6 Preset functions 8
4.7 Memorization of Radio Transmitters 9
4.7.1 Memorization Mode I 9
4.7.2 Memorization Mode II 9
4.7.3 “Remote” memorization 10
4.7.4 Deleting the Radio Transmitters 10
4.7.5 Declaration of conformity of the radio receiver 10
5 Testing and commissioning 10
5.1 Testing 11
5.2 Commissioning 11
6 Maintenance and Disposal 11
6.1 Maintenance 11
6.2 Disposal 11
To Next Page
Loading...
Need help?
General
