58
z
Easy Panorama
Follow the steps below to shoot panoramas. During shooting,
the camera focuses using auto-area AF; face detection is not
available. Exposure compensation can be used, but the built-in
flash will not fire.
1
Set focus and exposure.
Frame the start of the pan-
orama and press the shut-
ter-release button halfway.
Guides will appear in the
display.
2
Start shooting.
Press the shutter-release
button the rest of the way
down and then lift your fin-
ger from the button. a, c,
d, and b icons will appear in
the display to indicate the
possible pan directions.
3
Pan the camera.
Slowly pan the camera up, down, left,
or right as shown below. Shooting will
start when the camera detects the pan
direction and a progress indicator will
appear in the display. Shooting ends
automatically when the end of the
panorama is reached.
Progress indicator
To Next Page
Loading...
Need help?
General
