41
e Scene Mode
More on Photography
Compose the next shot to overlap with
the previous picture.
Take first picture. About one third of pic-
ture is shown superimposed on view
through lens (if pan direction is left to right,
picture will appear on left side of monitor).
Take the next picture.
Repeat steps 6 and 7 until all shots in se-
ries have been taken.
Panorama Assist
The pan direction, flash mode, macro close-up mode, and exposure compensation can not be changed after the
first picture is taken. To change the pan direction, press
^
button to end shooting and repeat steps 1–3.
Using a Tripod
Using a tripod makes it easier to compose shots so that they overlap.
Storage Locations for Panoramas
Each series of pictures taken at Panorama assist is stored in a separate folder with a name consisting
of "P" preceded by a three-digit folder number and followed by a three-digit sequence number
(e.g., "101P 002").
Joining Panorama Pictures
Transfer the pictures taken with Panorama Assist to your computer (Q 49) and use the Panorama
Maker function in PictureProject to join them into a single scene. For further information, see the
PictureProject Reference Manual (on CD-ROM).
5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
