19
Inserting Memory Cards
First Steps
B Formatting Memory Cards
If the message on the right is displayed, the memory card must be
formatted before use (A 117). Note that formatting
permanently deletes all images and other data on the memory
card. Be sure to make copies of any images you wish to keep
before formatting the memory card.
To format the memory card, use the multi selector to select Yes
and press the k button. To start formatting, choose Format and
press the k button.
• Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting is
complete.
• The first time you insert the memory cards used in other devices into the camera, be sure to
format them using this camera (A 117).
B The Write Protect Switch
When memory card switch is in the lock position, data cannot
be written to, or deleted from, the memory card. If the switch
is in the lock position, unlock it by sliding the switch to the
write position to save or delete images, or to format the
memory card.
B Memory Cards
• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Insert or remove the card
- Remove the batteries
-Turn off the camera
- Disconnect the AC adapter
• Do not format the memory card using a computer.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shocks.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
• Do not expose to humidity, dust, or to corrosive gases.
Yes
No
Card is not formatted.
Format card?
Write protect switch
To Next Page
Loading...
Need help?
Power
Display
Camera Specifications
Weight and Dimensions
