12
First Steps
First Steps
Charging the Battery
The camera uses a Rechargeable Li-ion Battery EN-EL10 (supplied).
Charge the battery with the Battery Charger MH-63 (supplied) before first
use or when the battery is running low.
1 Connect the power cable
Connect the power cable to the battery charger 1 and insert the wall plug into a
power outlet 2. The CHARGE lamp will light to show that the charger is on 3.
2 Charge the battery
Insert the battery into the battery
charger.
The CHARGE lamp starts blinking
when battery is inserted. Charging is
complete when lamp stops blinking.
About 100 minutes are required to
charge a fully depleted battery.
To Next Page
Need help?
General
