20
Basic Photography and Playback: Auto Mode
Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select
L
(Auto) Mode
This section describes how to take pictures in L (auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cam-
eras.
1 Press the power switch to turn the cam-
era on.
The power-on lamp will light and the monitor will
turn on.
Proceed to step 4 when M is displayed.
2 Press C.
3 Use the multi selector to choose L and
press d.
The camera enters L (auto) mode.
4 Check the battery level and number of
exposures remaining.
Battery level
Number of exposures remaining
The number of pictures that can be stored depends on the capacity of the memory
or memory card and image mode setting.
Monitor Description
NO INDICATOR Battery fully charged.
w
Battery low; charge or replace
the battery.
K
Warning!
Battery
exhausted.
Battery exhausted. Recharge or
replace with a fully charged
battery.
Shooting
12
12
Battery level indicator
Number of exposures
remaining
To Next Page
Loading...
Need help?
General
