14
Fr
En
Changing the measurement display mode
Switch between two modes (refer to the figure below) according to your golf
playstyle. The displayed information differs depending on the mode. Factory
default setting is golf mode.
1. Press the PWR button to turn on the Laser Rangefinder.
2. The measurement display mode switches every time you press the MODE
button.
Golf mode: Slope adjusted distance
(horizontal distance ± height) and actual distance
Actual distance mode
Incline
Decline
N/A
Actual
distance
Slope adjusted
distance
(horizontal distance
± height)
Actual
distance
N/A
• In Actual distance mode, the Actual Distance Indicator blinks.
• The setting is saved even when the Laser Rangefinder is turned OFF.
To Next Page
Loading...
Need help?
General
