12 13
En
Fr
Es
Pt
En
Fr
Es
Pt
￭ Inserting/Replacing battery
1. Type of battery
3V CR2 lithium battery x1
2. Inserting/Replacing battery
2-1. Open the battery chamber cover
Rotate the battery chamber cover counterclockwise and remove it. It may not open easily due to its rubber
packing for water resistance.
2-2. Insert the battery/Replace the old battery with a new one
Insert a new battery correctly positioned following the indication seal inside the chamber.
The [+] pole should be positioned toward the inside of the chamber. If the battery is not inserted correctly, the
Nikon Laser Rangefinder will not operate. When replacing the battery, remove the old battery then insert a new
one.
2-3. Close the battery chamber cover
Rotate the battery chamber cover clockwise to screw it into the body. It may not close easily due to the rubber
packing for water resistance, but continue to turn it all the way until it stops. Confirm that the cover is securely
closed.
3. Battery level indicator
*The battery condition mark in the internal display warns when the battery needs to be replaced.
Display Description
After power on, displays for 2 seconds only.
Sufficient power available.
After power on, displays for 2 seconds only.
Power getting low.
Prepare to replace the battery.
Displayed continuously.
Low. Battery should be replaced with a new one.
Blinks. After blinking 3 times, automatically
powers o.
Power exhausted.
Replace the battery.
[First step]
■
Operation overview
[Mode settings]
*Unoperated for 8 seconds or longer returns you to the standby screen whichever setting mode is displayed.
Short press of PWR button (less than 1.5 seconds)
switches modes.
Long press of MODE button
(1.5 seconds or more)
Long press of MODE button
(1.5 seconds or more)
Standby
Changing the distance display
unit (F1)
mYD
Short press of PWR button (less than 1.5
seconds) switches unit.
COOLSHOT 80i VR only
Short press of MODE button
(less than 1.5 seconds)
Golf mode:
Slope adjusted distance (horizontal distance ± height) and
actual distance
Horizontal distance and height mode
Actual distance and
height mode
N/A
Actual distance
mode
Long press of MODE button
(1.5 seconds or more)
Changing the measurement display mode (F2)
To Next Page
Loading...
Need help?
General
