Nikon D1 User Manual

7
Note
2
.3 Lock the aperture ring
Detaching the lens
Before detaching the lens, turn the cam-
era off. Then turn the lens clockwise
while holding down the lens-release but-
ton.
If you do not intend to set aperture manually using the lens aperture
ring, lock the lens aperture (the aperture ring can not be used unless
changes have been made to default settings as described in “Custom
Settings,” item 22).
22
ft
m
2
8
70
5
0
35
2
8
8
5
1
0
5
2
2
When no lens is attached…
If the camera’s lens mount is not cov-
ered, dust may find its way onto the
mirror or viewfinder screen. This can be
prevented by attaching the BF-1A body
cap to the camera when no lens is in
place (note that the BF-1 body cap can
not be used with the D1).
First Steps: Attach the Lens
When attaching or detaching the lens or body cap, be careful that dirt or other foreign
matter does not enter the camera body. The presence of foreign matter inside the
camera could affect your photographs. When changing lenses or replacing the body
cap, hold the camera with the base down or tilted so that the lens mount faces the
ground. Be sure to replace the body cap when no lens is in place.

Nikon D1 Specifications

Radio Specifications

radio channels PocketWizard	32 channels (344 - 354MHz)
radio channels FlashWizard	64 System ID’s ( all on 360.0MHz )
line of sight range	1, 000 feet (300 meters)

Power and Sensitivity

transmit power	-5dBm typical
receiver sensitivity	-93dBm for 12dB S/N ratio (typical)
batteries	Uses the camera’s rechargeable battery

Weight and Dimensions

size	2.25" x 0.8" x 0.12"
weight	0.16 oz.
antenna length	< 3 inches