58
Record-and-Review
When the camera is set to single-frame shooting, or the self timer is used, you
can choose to have photographs displayed automatically in the monitor
immediately after they have been saved to the memory card. This allows you
to delete unwanted photographs immediately after they have been taken.
To use record-and-review:
1
Pressing the button, rotate the main-command dial to select item 1 in
the custom settings menu (at default settings, “1-0,” for “Item 1, option 0,”
will be displayed in the rear control panel).
2
With the button held down, rotate the sub-command dial to set the
menu option to “2” (“record-and-review mode enabled”).
When you release the button, CUSTOM will be displayed in the rear
control panel.
3
Set the camera to single-frame shooting or self-timer mode.
Photographs taken at these settings will be displayed in the LCD monitor.
If the camera has been set to display the histogram and image highlights
(see “Playback”), these will be shown as well. If the camera is connected
to a television set, photos will also be displayed on the television screen.
Camera Settings: Record-and-Review