To Next Page

To Previous Page

Taking Photographs—Exposure

Press ing the button, rotate the sub-com mand dial to choose the

exposure increment ( 100–102).

Com pose a photograph, focus, and shoot. The cam era will vary ex-

po sure and/or ﬂ ash level shot-by-shot according to the brack et ing pro-

gram se lect ed. Mod i ﬁ ca tions to ex po sure are add ed to those made with

ex po sure com pen sa tion ( 97), making it possible to achieve exposure

compensation values of more than 5 EV.

While bracketing is in ef fect, a bracketing progress indicator will be

displayed in the top control panel. A seg ment will dis ap pear from the

in di ca tor af ter each shot.

To cancel bracketing, press the button and rotate the main com-

mand dial until the number of shots in the bracketing sequence is zero

and is no longer displayed in the control panel on top of the camera.

The program last in effect will be restored the next time brack et ing is

ac ti vat ed. Brack et ing can also be cancelled by selecting WB bracketing

for Custom Setting e5 or by per form ing a two-button reset ( 128), al-

though in this case the bracketing program will not be restored the next

time brack et ing is activated.

Shooting Mode

In single frame and self-timer modes, one shot will be taken each time the shutter-

release button is pressed. In continuous low speed and continuous high speed modes,

shooting will pause af ter the number of shots speciﬁ ed in the bracketing pro gram have

been taken. Shooting will resume the next time the shutter-release button is pressed.

e8—Auto BKT Selection ( 198)

If desired, the main command dial can be used to turn bracketing on and off and the

sub-command dial to select both the number of shots and the exposure increment.

Nikon D2H User Manual

Other manuals for Nikon D2H