57
Taking Photographs—White Balance
Preset White Balance
Preset white balance is used to record and recall custom white balance set-
tings for shooting under mixed lighting or to compensate for light sources
with a strong color cast. Four options are available for setting preset white
balance:
Recording New Values with the Camera
(1) Frame a neutral gray or white object and press the shutter-release button
to measure a value for white balance (
59).
(2) Measure white balance with the ambient light sensor ( 59).
Copying Values from Existing Photographs
(3) Copy white balance from another photograph on the memory card (
63).
(4) Copy white balance from Nikon Capture 4 (available separately; 64).
The camera can store up to fi ve values for preset white balance in presets
d-0 – d-4. White balance values recorded with options (1) and (2) are stored
in preset d-0. To prevent this value from being replaced the next time white
balance is measured, the value stored in d-0 can be copied to presets d-1 – d-4
for long-term storage ( 64). White balance values copied using options
(3) and (4) are also stored in presets d-1 – d-4. A descriptive comment can be
added to any white balance preset ( 62).
White Balance Presets
Changes to white balance presets apply to all shooting menu banks (
162). A con-
fi rmation dialog will be displayed if the user attempts to change a white balance preset
created in another shooting menu bank (no warning is displayed for preset d-0).
d-0
Stores last val-
ue measured
for white bal-
ance ( 58).
d
-
0
:
d-0
To Next Page
Loading...
Need help?
General
