222
Connections—Television Playback
Television Playback
Connecting the Camera to a Video Device
Use an AC Adapter
Use of an EH-6 AC adapter (available separately) is recommended for extended play-
back. When the EH-6 is connected, the camera monitor-off delay will be fi xed at ten
minutes and the exposure meters will no longer turn off automatically.
Video Output ( 209)
Be sure that the video standard matches the standard used in the video device. Note
that resolution will drop when images are output on a PAL device.
Audio Output ( 212)
Set Via VIDEO OUT to play back or record voice memos on the video device.
The supplied EG-D2 audio / video (AV) cable can be used to connect the D2H
to a tele vi sion or VCR for playback or recording.
1
Turn the camera off.
The EG-D2
Turn the camera off before connecting or dis-
connecting the EG-D2.
2
Open the cover protecting the A/V-out and
DC-in connectors.
A/V out
DC in
3
Connect the EG-D2 as shown.
Connect to
camera
Connect to
video device
4
Tune the television to the video channel.
5
Turn the camera on. The camera will function normally; while the moni-
tor is on, the image in the monitor will be shown on the television screen
or recorded to video tape.
To Next Page
Loading...
Need help?
General
