214
Menu Guide—The Setup Menu
Dust Off Ref Photo
This option is used to acquire reference data for the Image Dust Off function
in Nikon Capture (for more information on Image Dust Off, see the Nikon
Capture 4 User’s Manual).
1
Dust Off ref photo is only available when a CPU lens is mounted on
the camera. We recommend using a lens with a focal length of at least
50 mm. If using a zoom lens, zoom in to the maximum telephoto posi-
tion.
2
Highlight Dust Off ref photo in the setup
menu ( 206) and press the multi selector
to the right. The menu shown at right will be
displayed.
OK
Start
SET UP
Dust Off ref photo
3
Press the multi selector to the right. Camera
settings will automatically be adjusted for Im-
age Dust Off. The message shown at right will
be displayed, and will be displayed in the
viewfi nder and control panels.
Take photo of
featureless white
object 10cm from
lens. Lens will be
set to infinity.
Dust Off ref photo
SET UP
Top control panel Rear control panel
Viewfi nder
To cancel the operation and return to the setup menu, press the but-
ton or press the multi selector to the right. The operation will also be
cancelled when the camera or monitor is turned off.
Image Dust Off
The Image Dust Off feature in Nikon Capture 4 (available separately) processes NEF
(RAW) photographs to remove the effects of dust in the camera imaging system by
comparing the images to the data acquired with Dust Off ref photo. It is not avail-
able with TIFF (RGB) or JPEG images. The same reference data can be used for NEF
(RAW) photographs taken with different lenses or at different apertures.
To Next Page
Loading...
Need help?
General
