Nikon D2H User Manual

170
Menu Guide—Custom Settings
Custom settings are used to fi ne-tune a variety of camera settings to suit the
user’s pref er enc es, creating combinations of settings that differ from the fac-
tory defaults in effect at the time your cam era was purchased. In addition to
Custom Settings C (Bank select) and R (Menu reset), settings in the CSM
(Custom Settings) menu are divided into the following six groups:
Custom Settings
Fine-Tuning Camera Settings
Press the multi selector up or down to highlight
the desired group and then press the multi se-
lector to the right. The full list of Custom Set-
tings a1–f7 will be displayed, starting with the
settings in the selected group. To select a setting
in a different group, press the multi selector up or
down scroll until the desired setting is displayed,
or press the multi selector to the left to return the
top menu and select a different group. Custom Setting a1 (AF-C mode pri-
ority) and f7 (No CF card?) are linked: pressing the multi selector up when
Custom Setting a1 is highlighted displays Custom Setting f7, while pressing
the multi selector down while Custom Setting f7 is highlighted displays Cus-
tom Setting a1.
Using the Multi Selector
The multi selector can be used at any time when the monitor is on. The focus selector
lock switch only takes effect when the monitor is off.
A
Bank select
Menu reset
Autofocus
Metering/Exposure
Timers/AE&AF Lock
Shooting/Display
Bracketing/Flash
Controls
CSM MENU
C
R
a
b
c
d
e
f
Group Custom Settings
Autofocus a1–a8
Metering/Exposure b1–b6
Timers/AE&AF Lock c1–c5
Shooting/Display d1–d7
Bracketing/Flash e1–e8
Controls f1–f7
a
b
c
d
e
f
ON
OFF
ON
a1
a2
a3
a4
a5
a6
a7
a8
AF-C mode priority
AF-S mode priority
Group dynamic AF
Disable Lock-On
AF activation
Focus area Illum
Focus area
Vertical AF-ON
CSM MENU

Nikon D2H Specifications

General

Brand	Nikon
Model	D2H
Category	Digital Camera
Language	English