Nikon N Series User Manual

Nikon N Series/K Series Total Station Instruction Manual 77
Applications 4
Measuring distance and offset values on the arc-curve
1. Press [2] or select Arc RefLine in the
Programs menu.
2. Select the input method for the start of the curve.
When pressing
[1] or selecting P1
Enter the start of the curve point (P1).
To enter P1 by direct measurement, press the
MsrPT softkey.
Choose a method to define the arc.
Enter the end of the curve point (P2).
To enter P2 by direct measurement, press the
MsrPT softkey.
Enter the radius (Rad) or arc length (Len).
In the radius (Rad) field, enter a positive value
for a clockwise curve. Enter a negative value for
a counterclockwise curve.
Press
[ENT] to proceed to the curve definition.
If you press
[ENT] with a blank, the cursor moves
to the Len field.
In the arc length (Len) field, enter a positive
value for a clockwise curve. Enter a negative
value for a counterclockwise curve.

Nikon N Series Specifications

General

Brand	Nikon
Model	N Series
Category	Measuring Instruments
Language	English