2
2.1
Mount
Lens
and
Set
Aperture
Mount the lens to the camera
body and set the lens' aperture
to
its minimum setting (largest f-
number) for automatic
operation.
Turn
the main switch off and mount lens to the
camera body.
• Position lens
in
the camera's bayonet mount so that the mounting indexes
on lens and camera body are aligned, then twist lens counterclockwise
until it locks into place. (Be sure not to touch the lens release button.)
• When the lens is not attached or when a non-CPU lens
is
attached and
the main switch
is
turned on, F- - blinks
in
the LCD panel and viewfinder
and the shutter cannot be released.
(F
- - does not blink and shutter can be
released when the exposure mode
is
set to manual.)
2 2
Set the lens' aperture to its minimum and lock .
•
16
• When the lens is not set to its minimum aperture setting and the main
switch is turned on,
FE
E blinks
in
the LCD panel and viewfinder and the
shutter cannot be released.
To Next Page
Need help?
General
