8
8.1
28
Using
Built-In
Speedlight
If
~
(ready-light indication) blinks
in
the viewfinder when you
lightly press the shutter release
button, use the bu
il
t-in
Speedlight.
Press the Speed light lock-release button to release
the
Speed light.
•
As
soon
as
the Speedlight
is
released it starts recharging, and when the
Speedlight
is
ready to fire 'I appears without blinking
in
the viewfinder
(when the camera's meter
is
on).
• To close the Speedlight, press gently until it clicks shut. (To conserve
power, keep the Speedlight closed when it
is
not
in
use.)
Matr
ix
Balanced
Fill
-
Flash
Matrix Balanced Fill-Flash enables proper evaluation of exposure for the
main subject and background, and ensures adequate flash output. (For
details, see page 58.)
NOTE
:
Continuous
use
of
built-in
Speedlight
After continuous use of the built-
in
Speedlight, it may s
to
p firing to
protect the firing tube. Wait for a while befo
re
using the Sp
ee
d light
again.
To Next Page
Loading...
Need help?
General
