IZl
Check
points
o Focus, shutter speed and aperture can be confirmed
in
the viewfinder.
If any other indications appear, see page 70.
o When you reach the end
of
the film roll, the film starts
to
rewind
automatically.
o For mid-roll rewind, see page 34.
o For self-timer operation, see page 55.
7.3
7.4
Film starts to rewind automatically when film reaches
the end
of
the roll.
Ie'S
FS.D
@
__
(:l
[36]
• When you reach the end
of
the film roll, the film starts to rewind
automatically. 8 appears
in
the LCD panel during film rewind and the
frame counter counts backwards until rewind is complete. Pictures taken
on frames beyond the indicated number
of
the exposures for the film roll
may be discarded due to development procedures.
Confirm film
is
completely rewound, then remove film
cartridge.
~--
... @
,I;
[ r"'
<Ii!!!il
- (:l - C
• Film
is
completely rewound when the frame counter shows "E" and 8
blinks. Open the camera back away from sunlight and remove the film
cartridge by tilting it to one side. If the shutter release button is depressed
when rewound film
is
still
in
the camera back, "
8"
blinks. Remove film
cartridge.
27
z
o
~
W
Q.
o
o
~
To Next Page
Loading...
Need help?
General
