FSA03601-R.3629.A
- A23
･
SB-600 -
Inspection & adjustment software (J18365)
<Operating environment> The following operating environment is required for installing this program on PC.
PC: IBM PC/AT compatible
OS: Windows XP (Pro/Home), Windows 2000, Windows Millennium Edition (Me), Windows 98 Second Edi-
tion (SE)
CPU: Pentium Ⅱ 266MHz - Pentium Ⅳ 2GHz
RAM (memory): 64MB or more
HD: 6MB-or-more free disk space is required when installing
Monitor resolution: 800×600 pixels or more
Interface: RS232C or USB
As long as the above hardware requirements are met, any PC such as desktop or laptop, etc is usable.
<Notice on start-up>
When starting this program, close all other applications.
If some other applications are running, this program may not be activated.
<Procedure for installation>
The file (PSB600.EXE) of this program is provided via FD or e-mail.
Because this is the self-extracting file, decompress the file when installing according to the next procedure.
1. Create a folder for installation under a name you like and PC drive. (e.g.) C:\SB600
2. Copy the file (PSB600.EXE) in the created folder.
3. Double-click on the pasted file to display the following screen.
Press the OK button, then decompression starts.
4. When the decompression of file is finished, the file (SB600.EXE) is created.
5. The installation is completed.
<Start-up of Program>
1. Double-click the file (SB600.EXE), then the Inspection & Adjustment program for SB600 starts.
2. To display in ENGLISH, select the radio button "ENGLISH" in "LANGUAGE" in the lower right-hand
corner of the screen .
3. When the "HISTORY" button at the lower-left is pressed, the program version will be displayed.
4. Select the appropriate item button and follow the instructions on PC.
5. For this program, the communication port from COM1 to Com4 is selectable.
6. To finish the program, press the "Close (×)" button in the right-hand corner of the screen or "QUIT".
To Next Page
Loading...
Need help?
General
