9
1. Get started
■ Install the battery
Note: Always switch off the power and disconnect the
charger and any other device before removing the cover.
Avoid touching electronic components while changing
the cover. Always store and use the device with the
cover attached.
1. To remove the back cover of the
device, press the release button on the
bottom, and lift the back cover.
2. To remove the battery, insert your
finger into the finger grip and lift the
battery from its compartment.
3. To install the battery, position the
battery so the gold-coloured contacts
match up with those on the device,
insert the battery into the battery slot,
and push down on the other end of the
battery to snap the battery into place.
To Next Page
Loading...
Need help?
General
