Settings
48
■ Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You may
not be able to forward your calls if some call restriction functions are active.
See Call restrictions in "Security," p. 50.
Voice clarity > Active — to enhance speech intelligibility especially
in noisy environments
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the power key, the camera key, the left and right selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
1-touch dialing > On — to dial the names and phone numbers assigned to the
1-touch-dialing keys, 2 to 9, by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select Set by network.
Line for outgoing calls — to select the phone line 1 or 2 for making calls if supported
by your SIM card (network service).
Slide call handling — to set the phone to answer calls when you open the phone
and to end calls when you close the phone
■ Phone
Select Menu > Settings > Phone and from the following options:
Language settings — To set the display language of your phone, select Phone
language. Automatic selects the language according to the information on
the SIM card. To select the USIM card language, select SIM language. To set
a language for the voice playback, select Voice playback language. See
"Enhanced voice dialing," p. 20 and Voice commands in "My shortcuts," p. 42.
Security keyguard — to set the phone to ask for the security code when you unlock
the keyguard. Enter the security code, and select On.
To Next Page
Loading...
Need help?
General
