Settings
91
Lights (for Handsfree or Charger only)—Choose to keep the phone lights always on,
or to shut off automatically after several seconds. Select On or Automatic.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
Text phone (network service)—Connect to a TTY/TDD device. Check with the
manufacturer of the TTY/TDD device for a connecting cable that is compatible
with your phone. Check with your service provider for availability and description
of services.
■ Security settings
When first accessing the security settings, enter the preset lock code. Depending on
your wireless service provider, this can be the last four digits of your phone number,
1234, or 0000. If none of these work, contact your wireless service provider for help.
Phone lock
The phone lock feature protects your device from unauthorized outgoing calls or
unauthorized access to information stored in the device. With the phone lock
activated, Phone locked is displayed each time you turn your device on or off.
With the device locked, calls may still be possible to the official emergency number
programmed into your device.
1. Select Menu > Settings > Security.
2. Enter the lock code, and select OK. See "Change lock code," p. 92.
3. Select Phone lock and one of the following options:
Off—Immediately turns off the device lock feature.
Lock now—Immediately turns on the device lock feature.
On power-up—Turns on the device lock feature the next time you turn the
device on.
To Next Page
Need help?
General
