Nokia 6303 classic User Manual

Menu > Settings > Security > Access
codes.
• The security code helps to protect
your phone against unauthorised use.
The preset code is 12345. You can
change the code and set the phone to
request the code. Some operations
require the security code regardless of
the settings, for example if you want
to restore the factory settings. Keep
the code secret and in a safe place
separate from your phone. If you
forget the code and your phone is
locked, your phone will require
service and additional charges may
apply. For more information, contact
a Nokia Care point or your phone
dealer.
• The PIN (UPIN) code, supplied with the
SIM (USIM) card, helps to protect the
card against unauthorised use.
• The PIN2 (UPIN2) code, supplied with
some SIM (USIM) cards, is required to
access certain services.
• PUK (UPUK) and PUK2 (UPUK2) codes
may be supplied with the SIM (USIM)
card. If you enter the PIN code
incorrectly three times in succession,
you are asked for the PUK code. If the
codes are not supplied, contact your
service provider.
• The barring password is required
when using the call barring service to
restrict calls to and from your phone
(network service).
• To view or change the security
module settings for the browser,
select Menu > Settings >
Security > Security module sett..
Switch the device on and off
Switch on and off
Press and hold the power key.
Enter the PIN code
If requested, enter the PIN code (displayed
as ****).
Set the time and date
If requested, enter the date, the local time,
and the time zone and the daylight saving
time of your location.
When you switch on your device for the
first time, you may be prompted to get the
configuration settings from your service
provider (network service). For more
information, contact your service
provider.
Standby mode
When the phone is ready for use, and you
have not entered any characters, the
phone is in the standby mode.
Display
1 Signal strength of the cellular
network
Switch it on 11
© 2009 Nokia. All rights reserved. 11

Nokia 6303 classic Specifications

General

Display type	TFT
Display diagonal	2.2 \
Display resolution	320 x 240 pixels
Display number of colors	16.78 million colors
Flash memory	1024 MB
Internal memory	32 MB
Flash card support	Yes
Internal storage capacity	4 GB
Digital zoom	8 x
Rear camera resolution (numeric)	3.2 MP
Interface	microUSB
Networking type	EGSM
Playback formats	mp3, AAC, mp4, AAC+, eAAC+, H.263, H.264
Browser supported	HTML, XHTML, WML
Operating frequency	900/1800/1900 MHz
USB 2.0 ports quantity	1
Headphone connectivity	3.5 mm
Maximum frame rate	15 fps
Video capture resolution (max)	640 x 480 pixels
Ringer type	Polyphonic
Audio formats supported	AMR
Polyphonic rings quantity	64
Form factor	Bar
Phonebook capacity	2000 entries
Text prediction system type	T9
Personal info management (PIM)	Alarm clock, Calculator, Calendar, Countdown timer, Notes, Stopwatch, To-do list
Product color	Silver
Battery type	BL-5CT
Talk time (2G)	7 h
Battery capacity	1050 mAh
Standby time (2G)	450 h
Bluetooth version	2.0+EDR
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Volume control	Digital
Data network	EDGE, GPRS, wcdma

Weight and Dimensions

Depth	11.7 mm
Width	46.2 mm
Height	108.8 mm
Weight	96 g