Nokia FastMile 4G Receiver Installation Guide Determining the mounting location
Issue: 01 3TG-00387-ABBA-TCZZA 57
Figure 19 Screen indicating that you can use the Nokia Wireless app to find
an LTE base station for unit that will be managed by the Nokia
Altiplano FastMile Controller through NETCONF
Proceed by tapping on “Next”.
The Nokia Wireless app:
• indicates the direction for you to go to locate a nearby LTE base station
• indicates when it has located an LTE base station
• allows you to use a different LTE base station (if one is available) or to skip using the
augmented reality tool through three dots in the upper right corner of the screen that
provide the “Use a Different Base Station” and “Skip” options
• shows a magnet icon if there is a magnetic field interfering with the compass of the mobile
phone; clicking on the magnet icon informs you that you can recalibrate the compass by
making a figure of 8
• provides a “Done” button for you to tap when the Nokia Wireless app has located a
satisfactory LTE base station
When you have a satisfactory LTE base station, proceed by tapping on “Done”.
10 Unpack the Nokia FastMile 4G Receiver and connect a portable battery-powered PoE
injector to the Ethernet cable (Compact mono-band and ABA models) or Ethernet port
(Compact multi-band models) of the Nokia FastMile 4G so that the Nokia FastMile 4G
Receiver powers up.
To Next Page
Loading...
Need help?
General
