Table 7-25 IP Filter parameters
Field Description
Enable IP Filter Select this checkbox to enable an IP filter.
Mode Select an IP filter mode from the list:
• Drop for upstream
• Drop for downstream
Internal Client Select an internal client from the list:
• Custom settings: uses the IP address input below
• IP: uses the connecting devices' IP to the ONT
Local IP Address Enter the local IP address.
Source Subnet Mask Enter the source subnet mask.
Remote IP Address Enter the remote IP address.
Destination Subnet Mask Enter the destination subnet mask.
Protocol Select an application protocol or ALL from the list.
3
Click Add.
END OF STEPS
7.32 Configuring the URL filter
1
Click Security→URL Filter from the left pane in the GPON Home Gateway page. The URL
Filter page displays.
Configure a G-2425G-B indoor ONT
Security configuration
Configuring the URL filter
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
122 Issue 4