Table 7-33 Port Triggering parameters (continued)
Field Description
Triggering Port Enter the triggering port range.
Expire Time Enter the expiration time in seconds.
Open Protocol Select the open port protocol from the list:
• TCP
• UDP
• TCP/UDP
Trigger Protocol Select the triggering port protocol from the list:
• TCP
• UDP
• TCP/UDP
Enable Triggering Select this checkbox to enable port triggering.
WAN Connection List Select a WAN connection from the list.
Note: Only active devices are shown on this list.
3
Click Add.
END OF STEPS
7.39 Configuring DDNS
1
Click Application→DDNS from the left pane in the GPON Home Gateway page. The DDNS
page displays.
Configure a G-2425G-B indoor ONT
Configuring the Application
Configuring DDNS
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
August 2020
132 Issue 4