Nokia N97 mini User Manual

2 Connect your device to the PC using a USB data cable, and
select PC Suite mode.
3 Open the Nokia Software Updater application. The Nokia
Software Updater application guides you to back up your
files, update the software, and restore your files.
Settings
Your device normally has MMS, GPRS, streaming, and mobile
internet settings automatically configured, based on your
network service provider information. You may have settings
from your service providers already installed in your device,
or you may receive or request the settings from the network
service providers as a special message.
You can change the general settings in your device, such as
language, standby mode, display, and keypad lock settings.
Access codes
If you forget any of the access codes, contact your service
provider.
Personal identification number (PIN) code — This code
protects your SIM card against unauthorised use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card. After
three consecutive incorrect PIN code entries, the code is
blocked, and you need the PUK code to unblock it.
UPIN code — This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and is
supported by UMTS mobile phones.
PIN2 code — This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code) — The lock code
helps you to protect your device against unauthorised use.
The preset code is 12345. You can create and change the code,
and set the device to request the code. Keep the new code
secret and in a safe place separate from your device. If you
forget the code and your device is locked, your device will
require service. Additional charges may apply, and all the
personal data in your device may be deleted. For more
information, contact a Nokia Care point or your device dealer.
Personal Unblocking Key (PUK) code and PUK2 code — These
codes (8 digits) are required to change a blocked PIN code or
PIN2 code, respectively. If the codes are not supplied with the
SIM card, contact the operator whose SIM card is in your
device.
UPUK code — This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the USIM
card, contact the operator whose USIM card is in your device.
Remote lock
To prevent unauthorised use of your device, you can lock your
device and memory card remotely using a text message. You
must define the text message, and to lock your device, send
the text message to your device. To unlock your device, you
need the lock code.
To enable remote locking, and to define the text message,
select Menu > Settings and Phone > Phone mgmt. >
Security settings > Phone and SIM card > Remote phone
locking > Enabled. Tap the text input field to enter the text
© 2009 Nokia. All rights reserved. 11

Nokia N97 mini Specifications

General

Display diagonal	3.2 \
Display resolution	640 x 360 pixels
Display number of colors	16.78 million colors
Ringer type	Polyphonic
Internal memory	8192 MB
Maximum memory card size	16 GB
Front camera type	Single camera
Rear camera resolution	2584 x 1938 pixels
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Talk time (2G)	7.2 h
Battery capacity	1200 mAh
Standby time (2G)	320 h
Continuous audio playback time	28 h
Continuous video playback time	3.5 h
Personal info management (PIM)	Alarm clock, Calculator, Calendar, Notes, Stopwatch
Bundled software	FOTA, Microsoft Outlook, Outlook Express, Lotus Organizer, Lotus Notes, Flash Lite 3.0
Form factor	Slider
Product color	Black
Keyboard layout	QWERTY
2G standards	EDGE, GPRS, HSCSD
Data network	3G, csd, wcdma
Bluetooth version	2.0+EDR

Weight and Dimensions

Depth	14.2 mm
Width	52.5 mm
Height	113 mm
Weight	138 g