62
■ Profiles
In Profiles, you can adjust and personalize the phone tones for different events,
environments, or caller groups. You can see the currently selected profile at the
top of the display in the standby mode. If the General profile is in use, only the
current date is shown.
Select Menu > Settings > Profiles.
To activate the profile, select the profile and Activate.
Tip: To quickly change to Silent profile from any other profile, in the
standby mode, press and hold #.
To personalize a profile, select the profile, Personalise and from the following
options:
Ringing tone—To set the ringing tone for voice calls (also a video ringing tone),
choose a ringing tone from the list. Press any key to stop the sound. You can also
change ringing tones in contacts. See “Add a ringing tone,” p. 44.
Video call tone—Select the ringing tone for video calls.
Say caller's name—Select On to have the phone say the caller’s name when the
phone is ringing.
Ringing type—When Ascending is selected, the ringing volume starts from level
one and increases level by level to the set volume level.
Ringing volume—Set the volume level for the ringing and message alert tones.
Message alert tone—Set the alert tone for text and multimedia messages.
E-mail alert tone—Set the alert tone for e-mail messages.
Vibrating alert—Set the phone to vibrate to alert for incoming calls and messages.
Keypad tones—Set the volume level for keypad tones.
Warning tones—Activate or deactivate warning tones.
Alert for—Set the phone to ring only upon calls from phone numbers that belong
to a selected contact group. Phone calls coming from people outside the selected
group have a silent alert.
Profile name—Name the profile. This setting is not shown for the General and
Offline profiles.
When using the Offline profile, the phone is not connected to the GSM network. If
no SIM card is installed, to use some functions of the phone, start the phone in
Offline.
To Next Page
Loading...
Need help?
General
