91
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Menu > Settings > Connectivity > PTT > Options > Exit. Log out from PTT
after exiting application? is displayed. Select Yes to log out and close the service.
If you want to keep the application active in the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
1. Select Menu > Settings > Connectivity > PTT > Options > Contacts, scroll to
the contact you want to talk to, and press the call key.
2. When the connection has been established, to talk to the other participant,
press and hold the call key while you talk.
3. To end the PTT call, select Disconnect, or if there are several PTT calls, select
Options > Disconnect.
Answer a PTT call
If Accepted list calls is set to Notify in User settings, a short tone notifies you of an
incoming call. To accept the call, select Accept. To silence the tone, select Silence.
To reject the call, press the end key.
Make a PTT group call
To call a group, select Options > Contacts, select Options > Talk to many, mark
the contacts you want to call, and select OK.
Callback requests
Send a callback request
If you make a one-to-one call and do not get a response, you can send a request
for the person to call you back.
To send a callback request from Contacts, scroll to a contact, and select Options >
Send callback request.
To Next Page
Loading...
Need help?
General
