System 5000 Systems: ACM-16AT and ACM-32A Only
78 PN 15842:K 7/23/2002
S.4 Installing Modules in the System
The ACS begins annunciation with the control panel and continues with the
annunciation of circuits on the module installed directly after the control panel.
To ensure full employment of ACS points, mount System modules that require
annunciation in the control panel row first, then in the second row, etc. Modules
with circuits that need not be annunciated by the ACS should be installed further
down in the cabinet.
Top Row: Annunciator Address “1”
Points 1-32, annunciated by either the first
ACM-16AT and its first expander, or by
the first ACM-32A.
2nd Row: Annunciator Address “1”
Points 33-64, annunciated by either the
second and third expanders of an ACM-
16AT, or by an AEM-32A expander.
3rd Row: Annunciator Address “2”
Points 65-96, annunciated by either the
second ACM-16AT and its first expander,
or by the second ACM-32A.
4th Row: Annunciator Address “2”
Points 97-128, annunciated by either the
second and third expanders of the second
ACM-16AT, or by an AEM-32A.
Note: Without invoking the Eight-Point-
Shift, the first eight points would be dedicated to control panel functions, not
circuits of the first module. (See “Configuring the ACS for This Control
Panel.”)
CPU-5000
CPU5kSid.tif
To Next Page
Loading...
Need help?
General
