Octave HP 300 MK2 User Manual

17
7. ADVANCED FUNCTION: Connecting a processor
The tape loop offers the possibility to connect a digital or analog sound processor into the signal
path of the HP 300 MK2. This can be a room processor or similar. Modern processors include
either digital and analog inputs. The tape loop gives the user the possibility to use both of this
technologies.
How to do :
The processor should be connected in the analog way with his analog input to the TAPE record
outputs of the HP 300 MK2. The analog outputs of the processor have to be connected to the
TAPE-Play inputs of the HP 300 MK2. In this way the processor is receiving the selected signal of
the HP 300 MK2 input.
In this way the corrected signal of the processor is usable in the TAPE position of the Tape-
Switch

Any digital source like CD can connected direct to the processor. Most of the processors are
equipped with analog and digital inputs. This technology allows the use of a digital processor both
in the digital and in the analog path without degradation of the analog signal. Switching between
the two ways is very comfortable via the Tape switch
.
Of course this possibility is only realizable if there is no tape in use.
8. PROGRAMMABLE REMOTE CONTROL
Select your OCTAVE amplifier on the touch screen panel with button AUX. Once selected you can
always control the volume directly by pushing the button Vol + or Vol - .
Detailed information relating the use of the remote control you find in the owner's manual of the
HOME THEATRE MASTER REMOTE
Device selector OCTAVE code B
Volume up
Volume down

Octave HP 300 MK2 Specifications

General

Brand	Octave
Model	HP 300 MK2
Category	Amplifier
Language	English