Need help?Do you have a question about the Octave HP 700 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| THD | 0.1% |
| Input Impedance | 100 kOhms |
| Output Impedance | 4 Ohms, 8 Ohms |
| Power Output | 70W per channel |
Lists innovative features of the HP 700, including external power supply, protection circuit, and bypass function.
General safety advice, including emergency disconnect, case opening, service, and warning symbols.
Instructions on checking voltage match and grounding before connecting the amplifier.
Step-by-step instructions for safely connecting the HP 700 to other audio components.
Details the functions of the controls and indicators on the front panel of the HP 700.
Identifies input and output connectors on the rear panel, including GND, IN1-SL1, IN2-SL2, IN5 RCA, IN3 XLR, IN6 RCA, IN7 RCA.
Describes the power (switch) and control light on the front of the external power supply.
Identifies the power input, serial number, and connecting cable on the rear of the power supply.
Explains how to use the HP 700 within a multi-channel system for audio and home theater.
Illustrates the line board tube layout and explains jumper settings for adjustment capability.
Shows the tube layout for the phono section and lists German/international designations.
Addresses common issues like hum, crackling, clicks, pops, unbalanced channels, and hiss.
To Next Page
