Network User’s Guide
14
9. Switch the printer off for 15 seconds and on again.
AdminManager Standard Setup
AdminManager is a powerful Microsoft Windows-based utility
to configure all network interface functions easily and
intuitively via a graphical user interface.
Configuration requires a PC with Windows XP /2000 Advanced
Server or Vista, running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to
the network with TCP/IP or IPX/SPX and must be used on a PC
that is located on the same segment as the printer.
Installation
1. Insert the Network Software CD into the CD-ROM drive.
The Setup Utility starts automatically. If it does not start,
double-click \setup.exe (in the root directory) on the
CD.
NOTE
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
To Next Page
Loading...
Need help?
General
