Network User’s Guide
18
Device setup
Device Setup allows you to configure the network interface.
Type the root password (default value is the last 6 characters
of the MAC address) to configure. Remember that the root
password is case sensitive. If the MAC address contains any
alpha characters, type them as upper case. Device Setup
contains details for the following selectable tabs:
• General (see page 19)
• TCP/IP (see page 20)
• NetWare (see page 21)
• Ethertalk (see page 24)
• NetBEUI (see page 25)
• SNMP (see page 26)
• Email ([Send] (see page 28)
• Email [Receive (SMTP POP3)] (see page 30)
• SNTP (see page 32)
• Maintenance (see page 33)
• SSL/TLS (see page 35)
• IEEE 802.1x (see page 38)
The following section explains each tab’s functionality.
Depending on your printer, some items in the following
explanation may not be displayed.y
NOTE
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
To Next Page
Loading...
Need help?
General
