C9600 User’s Guide> 43
U
SING
THE
MENUS
NOTE
Menu details are given in “Appendix B – Menu system” on
page 109 for reference.
The Enter, Up-arrow, Down-arrow and Back buttons are used
to move through the printer menus. You can adjust settings (e.g.
set the paper size for Tray 1) or view information (e.g. how much
is left of a selected consumable).
Many of these menu settings can be, and often are, overridden
by settings in the Windows printer drivers. However, several of
the driver settings can be left at "Printer Setting," which will then
default to the settings entered in these printer menus.
The steps involved in using the menus are typically as follows:
1. Ensure that the LCD panel indicates that the printer is
ready to print.
2. Enter User menu mode by pressing either the Enter
button or the Up-arrow or Down-arrow button and
press the latter two repeatedly as required until the
desired menu is highlighted in the displayed list.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly
until the desired Item is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly
until the desired Value is highlighted.
7. Press the Enter button to select this Value. (If you are
setting a parameter, ensure that an asterisk (*) appears
beside the selected parameter Value.)
8. Press the Online button to exit menu mode and return to
the ready to print status.
Refer to the section entitled “Getting started” on page 44 and
“Appendix B – Menu system” on page 109 for examples of using
the menus.
To Next Page
Loading...
Need help?
General
