C9600 User’s Guide> 65
O
PTIONAL
ACCESSORIES
This section describes optional accessory equipment for your
printer. The following accessories are available:
> duplex unit (to enable two-sided printing) (C9600n only)
> additional RAM memory
> hard disk drive (required for verified and spooled printing,
direct printing of PDFs, when collation errors appear,
adding extra fonts) (C9600n and C9600dn only)
> second, third paper tray (to increase paper input capacity)
> high capacity feeder (equivalent to three paper trays)
(C9600n, C9600dn and C9600hdn only)
NOTE
1. Tray configurations are: Tray 1 only, Tray 1 + 2nd Tray,
Tray 1 + 2nd Tray + 3rd Tray, Tray 1 + HCF, Tray1 + 2nd
Tray + HCF
2. The C9600hdtn already has a High Capacity Feeder
installed and so can only accommodate one additional tray
(to give the maximum total of five).
> Wireless LAN networking capability
> Finisher (for stapling printer output)
> Printer cabinet
> Punch unit (to extend Finisher functionality)
To Next Page
Loading...
Need help?
General
